Filter
Top Products
– 39 –
SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
(ENGLISH DISPLAY TOUCHPADS)
SOUND CAUSE DISPLAY
LOUD, INTERRUPTED
*
Touchpad & External
FIRE ALARM FIRE is displayed; zone number of zone in alarm is displayed. If a fire alarm is
manually activated, zone number 95 will be displayed.
LOUD, CONTINUOUS
*
Touchpad & External
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM is displayed. Zone number of zone in alarm is also displayed.
ONE SHORT BEEP
(not repeated)
Touchpad only
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE.
c. BYPASS VERIFY
a. READY indicator light comes on.
b. The number of the open protection zone is displayed.
c. Zone numbers of the bypassed protection zones are displayed (one beep is
heard for each zone displayed). Subsequently, BYPASS is displayed.
ONE SHORT BEEP
(once every 40 seconds)
Touchpad only
a. SYSTEM IS IN TEST MODE
b. LOW BATTERY AT A
TRANSMITTER
a. Opened zone numbers will appear.
b. BAT displayed with zone number of transmitter.
TWO SHORT BEEPS
Touchpad only
ARM AWAY AWAY is displayed. Red ARMED indicator is lit.
THREE SHORT BEEPS
Touchpad only
a. ARM STAY OR INSTANT
b. ZONE OPENED WHILE SYSTEM
IS IN CHIME MODE.
a. STAY or INSTANT is displayed. Red ARMED indicator is lit.
b. CHIME displayed; zone number of open protection zone will be displayed if the
[✱] key is pressed.
RAPID BEEPING
Touchpad only
a. TROUBLE
b. MEMORY OF ALARM
c. SYSTEM LOW BATTERY
d. EXT. SOUNDER WIRING FAIL.
a. CHECK displayed. Zone number of troubled protection zone is displayed.
b. FIRE or ALARM is displayed; zone number of zone in alarm is displayed
c. BAT displayed with no zone ID number.
d. CHECK 70 is displayed.
SLOW BEEPING
Touchpad only
a. EXIT DELAY WARNING (if
programmed)
b. ENTRY DELAY WARNING
a. AWAY is displayed.
b. Exceeding the entry delay time without disarming causes alarm.
*
If a bell is used as external sounder, fire alarm is
pulsed ring;
burglary/audible emergency is
steady ring
.