Filter
Top Products
4
Important Safeguards (Continued)
The "Stop" and "Off/On" labels, are attached next
to the switches as shown in Figure 1-4. These
labels remind operators and casual personnel of the
function of these switches.
The "Operating Notice" label, shown in Figure 1-6,
is located on top of both drive belt assemblies to
remind operators of belt adjustment procedures.
Figure 1-6 – Operating Notice LabelFigure 1-4 – Stop and Off/On Labels
The "Up/Down/Lock" and "Out/In" labels, shown in
Figure 1-7, are attached next to the crank handles
that raise and lower the upper assembly (taping
head) and move the belts in and out to match box
width.
The "Safety Instructions" label, shown in
Figure 1-5, is attached to the top, front of the upper
assembly. The label provides convenient safeguard
instructions for the operator and service personnel.
Figure 1-5 – Safety Instructions Label
Figure 1-7 – Operating Labels