Filter
Top Products
Installing the VCN Access Concentrator 25
switch user guide. Implement the MAC addresses listed in Table 5 for the
VCN AC. Repeat the procedure to define the MAC addresses of the 24
VCN APs attached to the VCN AC. Start with the lowest VCN AP MAC
address of 00-C0-DA-40-80-19 and assign addresses for up to 24 VCN
APs consecutively.
Manual Procedures for SuperStack II 1100/3300
Enter every one of the 24 VCN AC port MAC addresses through the
SuperStack II web management interface.
Refer to the SuperStack® II Switch Management Guide, and follow the
instructions in the section “Inserting Permanent Entries” for the Switch
Database dialog. You will need to use a web browser on the computer
connected to the switch.
Insert the VCN AC port MAC addresses before connecting the VCN AC to
the Ethernet switch.
To manually insert a MAC address for an VCN AC port:
1
From the
Port Filter
list box, select a port for the entry.
Ignore the
VLAN Filter
list box.
2
In the
Enter MAC Address
field, enter the MAC (Ethernet) address for the
port.
3
From the
Select Action Type
list box, select
Insert
.
4
Click the
Apply
button.
The Display Database Entries table displays the new entry.
5
Repeat steps 1 through 4 for every port.
The Display Database Entries table is not automatically updated with the
new entry.
To update the table:
1
From the
Select Action Type
list box, select Display All
.
2
Click the
Apply
button
.
Table 5 lists the MAC addresses in hexadecimal format.