
29
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INSTALLATION
READ THESE INSTRUCTIONS
CAREFULLY BEFORE
ATTEMPTING TO RESET THE
TORQUEMASTER
®
PLUS SYSTEM.
IF IN QUESTION ABOUT ANY
OF THE PROCEDURES, DO NOT
PERFORM THE WORK. INSTEAD,
HAVE A TRAINED DOOR SYSTEMS
TECHNICIAN RESET THE SYSYEM.
This door is equipped with a
TorqueMaster
®
Plus system, which
provides a safety feature that prevents
the door from rapidly descending in
case of spring failure or forceful manual
operation. Signs of an activated system
on a dual spring system: Door opens,
but will not close; door makes a distinct
“clicking” noise upon opening. If the
system is activated, carefully follow
the reset instructions below or refer
to the door’s Installation Instructions
and Owner’s Manual to reset the
TorqueMaster
®
Plus system.
NOTE: Proceed with TorqueMaster Plus
Reset Instructions if it is absolutely
necessary to open the garage door,
contact your nearest qualified Wayne-
Dalton repair center for repairs.
RESETTING THE ANTI-DROP DEVICE
1. First, locate and visual inspect the
TorqueMaster
®
Plus end brackets to
determine if the system has engaged
(see illustration).
NOTE: If the TorqueMaster
®
Plus system
has not engaged, do not complete the
following step.
If the system has engaged, follow these
steps to reset the system:
2. Disengage opener (if installed) by
pulling or placing emergency disconnect
in the manual operated position.
3. With the door in the open or partially
open position, clamp vice grips on both
vertical tracks just below the bottom
section roller.
TorqueMaster
®
Plus Reset
Instructions
NO SPACE BETWEEN
DRUM PAWL AND CABLE
DRUM
INDICATES ENGAGEMENT
CABLE DRUM
DRUM PAWL
ENGAGEMENT SIDE VIEW
NO SPACE BETWEEN
DRUM PAWL AND
CABLE DRUM
ENGAGEMENT UNDERNEATH VIEW
SPACE BETWEEN DRUM PAWL
AND CABLE DRUM
NON-INDICATES ENGAGEMENT
NON-ENGAGEMENT SIDE VIEW
5/8” Socket
Ratchet Wrench
3” Extension
Vice Clamps
(Pair)
WARNING
NON-ENGAGEMENT UNDERNEATH VIEW
SPACE BETWEEN
DRUM PAWL AND
CABLE DRUM
CABLE DRUM
DRUM PAWL
RATCHET
PAWL