A SERVICE OF

logo

4.19 System board 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-71
4. Turn up the insulator (HNS HOLD RJ INSULATOR) and connect the RJ45 harness
to the connector CN4050 on the system board.
NOTE: When replacing a system board with a new one, stick the HNS HOLD RJ
INSULATOR in place.
5. Connect the RGB harness to the connector CN9511 on the system board.
6. Turn over the system board.