A SERVICE OF

logo

4.16 Smart card slot 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-57
4.16 Smart card slot
Removing the Smart card slot
To remove the smart card slot, follow the steps below and refer to Figure 4-32.
1. Disconnect the smart card FPC from the connector CN2170 on the system board.
2. Lift up the hook of the smart card slot in the direction as shown in the figure below to
remove the smart card slot from the guides.
Figure 4-32 Removing the smart card slot
CN2170
Smart card FPC
Smart card slot
Hook
Guide