Toshiba S500M Manual

A SERVICE OF

next previous

4.5 Fin cover 4 Replacement Procedures

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-19

4.5 Fin cover

NOTE: When repairing the PC, turn up the plastic film and clean the cooling fin with a

vacuum cleaner or other cleaning tool.

Do not use cotton sticks and tweezers to remove dusts. It may cause the cooling

module problem or dusts stuffed.

Removing the Fin cover

To remove the fin cover, follow the steps below and refer to Figure 4-7.

1. Using a thin-tipped tool, push on the hole in the edge of the Fin cover and remove the

fin cover while sliding it in the direction in the figure below.

Figure 4-7 Removing the fin cover

Fin cover

Hook

Hole

Plastic film