A SERVICE OF

logo

4.10 SW board 4 Replacement Procedures
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL] 4-37
4.10 SW board
Removing the SW board
To remove the SW board, follow the steps below and refer to Figure 4-20.
1. Turn up the insulator (LCD CONN INSULATOR) and disconnect the SW board
FFC from the connector CN9500 on the system board.
2. Push down the hook and slide the SW board in the direction as shown in the figure
below to remove it.
Figure 4-20 Removing the SW board
CN9500
SW board FFC
SW board
Hook
Guide
Insulator
(LCD CONN INSULATOR)