2
Press
Q
tobeginviewingtheselectedleortomove
to the next layer.
Press
T
to return to the previous layer.
3
Press
w
toviewthenextle,orpress
v
to view the
previousle.
Note:
If the previous or next file is not compatible, it will
be skipped automatically.
To view in Slide Show mode:
1
To switch to Slide Show mode, press
Q
during
Single View mode.
To return to Single View mode, press
Q
again.
2
Press
w
toviewthenextle,orpress
v
to view the
previousle.
Note:
If the previous or next file is not compatible, it
will be skipped automatically.
3
Press
Q
to return to Single View mode.
To set the Slide Show mode settings:
1
Press
R
during Slide Show mode.
2
Press
s
or
r
to highlight the item (Interval Time or
Repeat).
3
Press
v
or
w
to adjust the setting.
4
Press
R
or
T
to return to Slide Show mode.
Item Description
Interval Time
To set a time interval to view photos
(3sec, 5sec, 10sec, 15sec, 30sec, 60sec,
or 90sec).
Repeat
To display photos in the same directory
repeatedly. On/Off
To rotate the image:
While viewing the image in Single View mode, press
r
to rotate the image 90 degrees clockwise, press
s
to
rotate the image 90 degrees counterclockwise.
To return to the thumbnail window:
Press
T
during Single View mode or Slide Show mode.
To display file status information:
1
Press
P
. The following information will be displayed
at the bottom of the screen.
•Filenumber/Totalnumberofles(onlyforles
stored in the same directory)
•Phototitle
•Dateandtimetaken
•Filesize
•SlideShowicon(ifapplicable)
•Repeatplayicon(ifapplicable)
•Operationguide
2
Press
P
again to remove the information from the
screen.
Note:
The file status information will disappear after about
6 seconds.
File Compatibility :
Data compatibility: JPEG Exif ver 2.2
File format: DCF ver 1.1
Maximum viewable resolution: 16384 × 16384 pixels
(Total number of pixels: 10,000,000)
Maximumphotosize:9MB
Totalnumberofles:Lessthan2000perfolder