A SERVICE OF

logo

Open as PDF
next previous
37
Connecting your TV
Connecting HDMI and DVI devices
• Whenturningonyourelectroniccomponents,turnon
theTVrst,andthentheHDMIorDVIdevice.
• Whenturningoffyourelectroniccomponents,turnoff
theHDMIorDVIdevicerst,andthentheTV.
• ThisTVmaynotbecompatiblewithfeaturesand/or
specicationsthatmaybeaddedinthefuture.
• ThisTVisonlyoperablewithL-PCMon32/44.1/48
kHzand16/20/24bits.Ifthereisnosoundwhenusing
HDMI, use the analogue audio cables to connect the TV
and the HDMI device and select
Analogue
for
HDMI 1
Audio
of the
AV Connection
menu (
-
page 38).
Connecting HDMI and DVI devices
The HDMI input on your TV can receive digital audio and
uncompressed digital video from an HDMI device and
uncompressed digital video from a DVI device.
This input is designed to accept HDCP programme
material in digital from CEA-861-D compliant consumer
electronic devices (such as a set top box and DVD player
with HDMI and DVI output).
The HDMI input is designed for best performance with
1080i(50Hz/60Hz),1080p(24Hz/50Hz/60Hz)high-
denitionvideosignals,butwillalsoacceptanddisplay
480i,480p,576i,576p,720p(50Hz/60Hz)andVGA
(VESA640×480@60/72/75Hz)signals.
•
HDMI
:High-DenitionMultimediaInterface
•
DVI
: Digital Video Interface
•
HDCP
: High-bandwidth Digital Content Protection
• CEA-861-Dcompliancecoversthetransmissionof
uncompressed digital video with high-bandwidth
digitalcontentprotection,whichisbeingstandardized
forreceptionofhigh-denitionvideosignals.Because
this is an evolving technology, it is possible that some
devices may not operate properly with the TV.
• AcceptablePCsignalformat:
S-VGA: VESA 800
5
600@56/60/72/75Hz
XGA: VESA 1024
5
768@60/70/75Hz
W-XGA: VESA 1280
5
768@60/75Hz
W-XGA: VESA 1360
5
768@60Hz
S-XGA: VESA 1280
5
1024@60/75Hz
However, these signal formats are converted to match
the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
•
L-PCM
: Linear-Pulse Code Modulation
Connecting an HDMI device
One HDMI cable (type A connector) is needed.
VIDEO AUDIO
L R
IN
OUT
HDMI OUT
1 2 3
Back of TV
Right side of TV
HDMI device
For proper operation, it is recommended that you use a
short HDMI cable.
HDMI cable transfers both video and audio.
Note:
It is possible that some HDMI devices may not
operate properly with this TV.
Connecting a DVI device
One HDMI (type A connector) -to-DVI adapter cable and
analogue audio cables are needed.
VIDEO AUDIO
L R
IN
OUT
DVI
OUT
PC/
HDMI 1
(
AUDIO
)
1 2 3
DVI device
Back of TV
Back of TV
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m. The recommended
length is 2m.