A SERVICE OF

logo

Open as PDF
next previous
15
Notes :
• The same menu is displayed in DTV (Digital TV)
and ATV (Analogue TV) modes; however, some
items are greyed out in each case.
• In video input mode (
o
1
-
o
4
),
Auto Tuning
,
ATV Manual Tuning
,
DTV Manual Tuning
and
DTV
Settings
are not available. Instead,
Manual
Settings
appears in the
SETUP
menu (
-
page
28).
• If you connect external equipment via component
video source,
Colour System
selection in the
Manual Settings
menu is not available.
• If you do not make a selection for a while, the menu
display disappears automatically.
• If you want to close the menu display instantly,
press
P
or
MENU
.
• To return to the previous menu, press
T
.
• In PC input mode,
PC Settings
appears in the
SETUP
menu (
-
page 40).
• When the
3D Colour Management
function is set
to on (
-
page 22), you can select
Base Colour
Adjustment
in the
PICTURE
menu.
Programming channels into the
TV’s channel memory
Auto Tuning
Auto Tuning
will completely re-tune the TV and can be
used to up-date the channel list.
It is recommended that
Auto Tuning
is run periodically
to ensure that all new services are added. All current
channels and settings, e.g. locked channels, will be lost.
Note:
As new services are broadcast, it will be necessary
to retune the TV in order to view them.
1
Press
MENU
, and then press
v
or
w
to select the
SETUP
menu.
SETUP
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Picture Position
AV Connection
Germany
Antenna
Quick Setup
English
2
Press
s
to select
Auto Tuning
, and then press
Q
.
A screen will appear warning that previous settings
will be deleted.
Auto Tuning
Previous settings will be lost! Press EXIT for
no change.
DTV and ATVTuning Mode
Start Scan
3
Use
v
or
w
to select
DTV
and
ATV
,
DTV
or
ATV
.
Then, press
s
to select
Start Scan
, and then press
Q
to continue with the
Auto Tuning
.
The TV will start to search for all available DTV and/
or ATV services.
You must allow the TV to complete the search. When the
search is complete, the
Auto Tuning
screen will display
the services found.
4
Use
s
or
r
to move through the list to select a
channel, and then press
Q
to view.
ATV Manual Tuning
- analogue only -
Use the Manual Tuning operation if desired channels
cannot be preset by Auto Tuning or if you would like to
presetchannelstospecicpositionnumbersonebyone.
1
From the
SETUP
menu, press
s
or
r
to select
ATV
Manual Tuning
.
2
Press
Q
to display the
ATV Manual Tuning
menu.
Press
r
or
s
to select the position you want to set.
Pos. Station
ATV Manual Tuning
1
2
3
4
6
7
8
5
3
Press
Q
to display the settings menu. Press
v
or
w
to select an item, and then press
r
or
s
to set the
item as shown below.
Position: 1
ATV Manual Tuning
1
B/G
A 0
A C E
B D F
G
A. Position selection
B.System(Sound)
B/G
,
D/K
,
I
Getting started