A SERVICE OF

logo

Open as PDF
next previous
Patch work
These stitches are used to join two pieces of
fabric while leaving a space between their
edges.
2,
3.
4,
Fold over the edges of the two pieces of fab-
ric for the hem and baste the edges to a thin
piece of paper leaving a small space be-
tween them.
Set the Pattern selector on "l".
Turn the stitch length dial to "S".
Stitch along the edge, pulling both threads
slightly when beginning to sew.
* Use thicker than normal threads for sewing.
After sewing, remove the basting and the pa-
per. Finish by tying knots on the reverse side
at the beginning and the end of the seams.
92