4.12 Filter Configuration
The GSW-1602SF/GSW2404SF/GSW-2416SF support per-Port IP Filter function to management the IP traffic flow. With
the IP Filter configuration, administrator can block the specify source IP Address range. The screen in Figure 4-48
appears.
Figure 4-48 Filter Configuration screen
The Filter Configuration page includes the following fields: Table 4-25 Description of the Filter Configuration.
• Item
Description
• Port
Indicate port 1 to port 24 for the IP Filter setting.
• Mode
To “Enabled” or “Disabled” the IP Filter on the selected port. If “Enabled” be
selected, the next two fields are allowed to be configured. Press “Apply” to active
the IP Filter setting on the port.
• IP Address
This input field allows the user to enter the “Source IP network address” to be
filtered on the selected port. This field has to co-work with the “IP Mask” filed.
• IP Mask
This input field allows the user to enter the “IP Mask” of the Source IP address to
be filtered on the selected port.
• DHCP Server
Allowed
To allow the ICMP DHCP request and reply packets be pass through the port
even the IP address of the DHCP server inside the range of the Filter list.
Table 4-25 Description of the Filter Configuration
-58-
