Backpressure is enabled on Half-Duplex mode.
• Disable – No flow control or backpressure function on no matter
Full-Duplex or Half-Duplex mode
• Ingress Rate Limit
The value of inbound traffic limitation in kilobit-per-second (kbps). Per port in step
of 128 kbps.
Default : No Limit
The range between 128 Kbps to 3968 kbps.
• Egress Shaping
The value of outbound traffic limitation in kilobit-per-second (kbps). Per port in
step of 128 kbps.
Default : No Limit
The range between 128 Kbps to 3968 kbps.
• Port Description
Make a brief description for the port to help network manager identify the device
connected to it.
Maximum Length : 8 characters
For example, label it as “VoIP Phone” if an VoIP Phone is connected to this port.
Table 4-3 Description of the Port Configuration
#Note:
When set each port to run at 100M Full, 100M Half, 10M Full, and 10M Half-speed modes. The
Auto-MDIX function will disable.
-17-
