4.2.2 Misc Configuration
The Misc Configuration includes the DHCP Enabled, IP Subnet address, Power Saving and Management VLAN. System
name and description, password, Inactivity Timeout and SNMP enable and SNMP related function. The screen in Figure
4-3 appears.
Figure 4-3 Misc Configuration screen
The page includes the following configurable data; see the table 4-2 description of the Misc Configuration.
Item Description
DHCP Enabled - Choose what the switch should do following power-up: transmit a DHCP request,
or manual setting (Disable). The factory default is “Disable”.
IP Address - The IP address of the interface. The factory default value is 192.168.0.100
Subnet Mask - The IP subnet mask for the interface. The factory default value is 255.255.255.0
Gateway -
The default gateway for the IP interface. The factory default value is
192.168.0.254
Power Saving
This function provide the device can operate under less power consumption
mode and saves energy, money, and helps protect the environment. The
available options are disable and enable, the default value is “Disable”
Management VLAN -
Specifies the management VLAN ID of the switch. It may be configured to any
value in the range of 1 - 4093. The management VLAN is used for management
of the Switch.
System Name –
Defines the user-defined device name
-14-
