Operation
72 User Manual
To set/cancel (Forwarding Calls from a Receiving Group)
Forwarding your calls on ISDN Service
All calls are forwarded to an outside party by ISDN line on one of the following conditions. This is the
Call Forwarding feature provided by the ISDN service.
— Unconditionally
(Call Forwarding Unconditional [CFU])
— When your extension is busy
(Call Forwarding Busy [CFB])
— When you do not answer
(Call Forwarding No Reply [CFNR])
• The FWD/DND button button light shows the current status as follows:
Off
: Both features are not set.
Red on
: FWD mode
Flashing red
: DND mode
• The Group FWD button light shows the current status as follows.
Off
: No set
Red on
: FWD mode
• The transferred outside call is also forwarded to the destination assigned for
outside calls.
• You can change the mode by pressing the FWD/DND button or the Group FWD
button while in on-hook.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or re-arrange a FWD/DND button or a Group FWD/DND button.
PT/SLT/PS
0
1
Set
Cancel
OR
Enter #.
On-hook.
C.Tone
Enter 1 to set
or 0 to cancel.
Enter receiving group
extension number
or G-DN.
Off-hook.
Press desired button or enter 71 and then 0 to 2 as you desire.
OR
(Group FWD)
OR
(Group FWD-External)
(Group FWD-Internal)
All
Intercom
Outside Line
1
4
5
6
7
OR
All
Intercom
Outside
Line
OR
OR
OR
OR
(DSS)
(G-DSS)
/
destination
extension no.
Press DSS/G-DSS or enter destination
extension number. Or enter outside line
number and then outside phone number.
(Max. 32 digits)
outside
phone no.
outside
line no.
OR
(G-DN)
receiving group
extension no.
