Operation
16 User Manual
Portable Station Buttons
Combination Buttons
Some special features can be used by combining two buttons.
SHIFT
:
Used to access the second level of Soft
Button functions.
INTERCOM
:
Used to make or receive intercom
calls.
Flexible CO
(F1 to F3):
Used to make or receive an outside
call. F1 button is already assigned as a
Loop-CO button (Default: L-CO).
Pressing this button seizes an idle line
automatically.
F1 to F3 buttons can be used as the
desired function buttons. (Button
assignment is required.)
If the term is in parentheses like
(
Save
), it means this button has been
made into a "Save" button.
TALK
:
Used to make or receive calls.
CANCEL/POWER
:
Used to end calls, or exit the Directory
or Function mode.
And also used to switch the power (ON/
OFF) by pressing for a while. (about 5
sec)
CLEAR/TRANSFER
:
Used to clear incorrect digits while
entering numbers in pre-dialling or
transfer a call to another extension.
And used to return to previous step
group display.
FUNCTION/KEY-LOCK
:
Used to enter into the Function mode
or access features by pressing
additional keys. And used to set
"KEYPAD LOCK / UNLOCK" by
pressing for about 2 seconds.
AUTO/OK
:
Used for System Speed Dialling and
storing program changes.
UP/DOWN
:
Used to select the ringer volume
(seven levels) during on-hook or
ringing status, or receiver volume (four
levels) during a conversation.
And used to shift the display.
SELECT
:
Used to select the displayed function.
And used to enter the Directories.
PAUSE Button ( ):
Used to insert a pause between
numbers.
FKEY LIST Button:
Used to display the selected features
of the Flexible CO Buttons.
FWD/DND Button ( ):
Used to set the Call Forwarding or Do
Not Disturb (DND) features.
REDIAL Button ( ):
Used to display the last 5 numbers you
called.
MESSAGE Button ( ):
Used to leave a notification to the
called party or call back to the
message sender.
PS-PROGRAM Button( ):
Used to enter the PS-Programming
mode in the programming mode.
SHIFT
INT'
F1 F2 F3
CLR
OK
1
8
2
9
3
0
