A SERVICE OF

logo

24 Adjust the Handstrap
MX6 Reference Guide E-EQ-MX6RG-E-ARC
Adjust the Handstrap
Note: The handstrap is not available on mobile devices with an integrated laser barcode
scanner. See “Accessories” for holsters and cases designed for an MX6 laser barcode
scanner without a handle or handstrap.
Figure 2-6 Handstrap
The MX6 has an integrated elastic handstrap that provides a comfortable, secure grip on a unit
without a trigger handle. The handstrap is attached to the MX6 with a clip on the bottom panel.
The handstrap should be disconnected from the bottom clip when the main battery is to be
removed or replaced. The handstrap can be removed from the MX6 if desired.
Prior to adjusting the handstrap, pull down on the handstrap and insert the bottom assembly into
the slot at the bottom of the MX6. Insure that both ends of the bottom assembly are secure.
Open the closed loop fastener tabs and adjust the handstrap for a comfortable, secure fit. Press the
closed loop fastener ends together.