Settings Options 147
E-EQ-MX6RG-E-ARC MX6 Reference Guide
Advanced Tab
Access: Start | Settings | Connections tab | 802.11b Settings | Advanced tab
Figure 4-64 WLAN Settings - Advanced
Power Save Mode
Disable Choosing this option will disable the power save mode.
Always Enable Choosing this option will have the power save mode always enabled. This is
the default setting.
Auto Enable When internal battery is being used it will be in Power Save mode; when
external power supply is being used the Power Save mode will be disabled
automatically.
Sliding the toggle bar towards “Best Battery Life” may cause a slowdown in performance
response time.
802.11b Preamble Mode
A preamble consists of a Synchronization (Sync) field and a 16-bit Start Frame Delimiter (SFD)
field. There are three options for this parameter. The default parameter is Auto Tx Preamble.
Long Tx Preamble Sync field consists of 128 bits.
Short Tx Preamble Sync field consists of 56 bits.
Auto Tx Preamble Automatically changes between long and short preamble mode
transmission based on the access point configuration.
