Page 4-37
2. Press any front panel button on your recorder, except the Power button. If the front
panel is working correctly, the recorder briefly displays a message that says "Front
Panel button." If the front panel is not working correctly, the recorder displays a
failure message. See the Diagnostic Test section of the Problems and Solutions
Tables on page A-18.
3. Press the
Power button or Cancel button to
end the test.
Note: If you press the Power button to end
the test, your recorder powers OFF.
Using the System
Diagnostic Tests
4
POWER
C
A
N
C
E
L
REMOTE CONTROL DIAGNOSTIC TEST
This test verifies that the buttons on your remote control are working correctly.
1. Select the Remote Control option.
2. Press any remote control button, except the
Power, the Cancel, the Address, or the
VCR buttons. If the remote control is working correctly, the recorder briefly displays
a message that says "Remote Control button." If the remote control is not working
correctly, the recorder displays a failure message. See the Diagnostic Test section of
the Problems and Solutions Tables on page A-18.
Note: This test does not cover the Address button.
3. Press the
Power button or Cancel button to
end the test.
Note: If you press the Power button to end
the test, your recorder powers OFF.
Remote
Menu Options
Buttons
POWER
C
A
N
C
E
L
2 Remote Control
2
