Page 5-8
User and
Installation Guide
INDEX SEARCH
Best with: Bit stream and analog recordings.
Index codes are placed on the tape at the start of each recording. You can find and automati-
cally play back from the start of any recording using the Index Search function.
Do the following:
1. Press the
Mode button until the remote is in
the D-VHS mode.
2. While the tape is stopped, press the
Index
™ or £ button.
To access a recording 2—9 index codes away,
press the
Index ™ or £ button repeatedly
until the correct number is displayed on
screen (only if Superimpose is set to ON
(see pg. 5-12). Playback begins automatically
when the desired recording is located.
Remote
Menu Options
Buttons
MODE
1
™INDEX
3
INDEX£
Notes:
ࡗ If necessary, press the Rewind or Fast Forward button when play starts to search
visually to find the exact beginning of the desired program.
ࡗ An index code is not placed on the tape when recording is paused and then resumed.
