Hunter Fan 42660-01 Manual

next previous

42660-01•01/30/08•HunterFanCompany

4-1. Find the looped end of the braided cable and insert it through the

ceiling plate and one of the holes in the outlet box into the ceiling.

4-2.Accessthesupportbraceintheceiling.Youmaynotbeabletodo

this from below the ceiling depending on your installation site.

4-3.Driveawoodscrewandwasherintothesideofthebracethat

holdstheoutletbox.Leave3mm(1/8”)ofspacebetweenthe

support brace and the washer.

4-4. Wrap the braided cable around the support brace once creating a

complete circle.

4-5.Hooktheloopedendofthecableoverthewoodscrewsothatthe

braided cable lies between the washer and the support brace.

4-6. Tighten the loop and secure the screw and washer all the way

down to the support brace.

4-7.Coiluptheexcesscable.

4-8.Returntothefansoyoucancompletethefanwiring.

Step 4-1

3mm (1/8")

Steps 4-2 – 4-3

Steps 4-4 – 4-5

Steps 4-6 – 4-7

Support

Brace

Ceiling

OutletBox

Braided

Cable

4 • Securing Fan to Secondary Support System