Hunter Fan 42660-01 Manual

next previous

42660-01•01/30/08•HunterFanCompany

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

8-15. Touninstallthelightxture,rstdisconnecttheplugconnectors

between the black wire and the black/white wire.

8-16. Disconnecttheplugconnectorsbetweenthetwowhite

wires.

8-17. Uninstalltheconnectorandwasherfromtheendofthe

light ﬁxture inside the lower switch housing.

8-18. Unscrewthethreadedrodofthelightxturefromthe

lower switch housing.

8-19. Removethelightxturefromthelowerswitchhousing

pulling disconnected wires through the hole in the

center of the lower switch housing.

Note: When removing the wires, pull the thin plug

connector (male) through ﬁrst, and then pull the other

plug connector (female) through the hole.

8-20. Installthedummyterminals(includedinthesackparts)

on the two disconnected wires in the lower switch

housing.

8-21. Installtheswitchhousingcapandplugbuttontothe

lower switch housing.

8-22. Onceyouhaveuninstalledthelightxture,continue

 withstep8-6.

Lower Switch

Housing

readedRod

Steps 8-17 – 8-19

Male Dummy

Terminal

Female Dummy

Terminal

Step 8-21

Cap

Plug Button