Hunter Fan 42660-01 Manual

next previous

42660-01•01/30/08•HunterFanCompany

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

8-8. FirstinstallB10candelabrabulbs(60WattMaximum)intothe

sockets.

8-9. Attachtheextrapullchain(included)tothefanpullchainusing

the plastic breakaway connector. (You may ﬁnd the plastic

breakaway connector on the end of the extra chain.)

8-10. readthefanpullchainthroughtheholeinthemetaldisk.en,

thread the fan pull chain through the hole in the center of the glass

bowl.

8-11. readthelightpullchainthroughtheholeinthecenterofthe

glass bowl. en, read the light pull chain throught the hole in

the center of the cover plate.

8-12. readthefanpullchainthroughthegrommetholeinthesideof

the cover plate.

8-13. Placethecoverplateupagainstthe

glassbowl.Aligntheholesinthecover

plate and glass bowl.

8-14. readthelightpullchainthrough

the ﬁnial and screw the ﬁnial onto the

threaded rod end until tight.

Breakaway

Connector

Light Bulbs

(B10

Candelabra

Base 60 Watt

Maximum)

MetalRod

Metal Disk

GlassBowl

Cover Plate

Finial