Hunter Fan 42660-01 Manual

next previous

42660-01•01/30/08•HunterFanCompany

YourHunterfancomeswithanintegratedlightxtureassemblyand

an optional switch housing cap and plug button. is feature gives

youtheoptionofinstallingthefanwithORwithouttheincludedlight

ﬁxture. e steps below direct you whether or not you are installing a

light ﬁxture.

WARNING:Useonlythelightxturesuppliedwiththisfanmodel.

8-1. Toattachtheupperswitchhousing,partiallyinstalltwohousing

assembly screws into the switch housing mounting plate.

8-2. Feedtheupperplugconnectorthroughthecenteropeningofthe

housing.

8-3. Alignthekeyholeslotsinthehousingwiththehousingassembly

screws.

8-4. Turnthehousingcounterclockwiseuntilthehousingassembly

screws are ﬁrmly situated in the narrow end of the keyhole slots.

Install the remaining screw into the housing. Tighten all three

screws ﬁrmly.

CAUTION: Make sure the upper switch housing is securely

attached to the switch housing mounting plate. Failure to properly

attach and tighten all three assembly screws could result in the

switch housing and light ﬁxture falling.

8-5. If you want to install the light ﬁxture,proceedwithstep7-6

now.

If you do not want to install the light ﬁxture, you need to

uninstallitnow.See“UninstallingtheLightFixture”onstep7-15.

Onceyouhaveuninstalledthelightxture,continuewithstep7-6.

Steps 8-1 – 8-3

Housing

Assembly

Screw

Upper

Switch

Housing

8 • Completing Your Installation With or Without a Bowl Light Fixture