Hunter Fan 42660-01 Manual

next previous

42660-01•01/30/08•HunterFanCompany

Hunterfansuseseveralstylesoffanbladeirons(bracketsthatholdthe

blade to the fan).

7-1. Yourfanmayincludebladegrommets.Ifyourfanhasgrommets,

insert them by hand into the holes on the blades.

7-2. Attacheachbladetoabladeironusingthreebladeassembly

screws. If you used grommets, the blades may appear slightly loose

after screws are tightened. is is normal.

7-3. Removetheblademountingscrewsandrubbershippingbumpers

from the motor. Note: Some blade mounting screws are installed

in the motor to secure shipping blocks.

7-4. Foreachblade,insertoneblademountingscrewthroughthe

blade iron, and attach lightly to the fan. Insert the second blade

mounting screw, then securely tighten both mounting screws.

Step 7-1 (Detail)

BladeAssembly

Screws

Usewithgrommet

Usewithoutgrommet

Grommet

Blade

Mounting

Screw

Steps 7-1 – 7-2

Step 7-4

7 • Assembling the Blades