A SERVICE OF

logo

6 - 1
6
Scale
Programming the Scale Interface
RS232
OPOS - Single Cable
Scan the following programming codes to set up the scanner/scale using the OPOS drivers when connected via a sin-
gle RS232 cable.
Baud Rate/Parity sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Single Cable configures the Stratos bioptic for a scale interface.
External Scale Display configures the Stratos bioptic for an external display. If you do not have an external display,
you do not need to scan the External Scale Display code.
NCR Protocol - Single Cable
Scan one of the following bar codes to set up the scanner/scale for an NCR Communication Protocol (Retalix Storeline
and LOC SMS POS application software) when connected via a single RS232 cable. This also sets the baud rate to
9600 bps and the data format to 8 data bits, no parity, 1 stop bit. Select the appropriate code for either kilograms or
pounds.
Baud Rate/Parity
Single Cable
External Scale Display
NCR Protocol English (lbs)
Single Cable
NCR Protocol Metric (kg)
Single Cable