A SERVICE OF

logo

Switch Meshing
Configuring Switch Meshing
Ports A1 and A2 configured
for meshing.
Figure 14-8. Example of Mesh Group Assignments for Several Ports
6. Repeat step 5 for all ports you want in the mesh domain.
No t e s For meshed ports, leave the Ty pe value blank. (Meshed ports do not accept a
Type value.)
All meshed ports in the switch automatically belong to the same mesh domain.
(See figure 14-2 on page 14-4.)
7. When you finish assigning ports to the switch mesh, press , then
(for S
ave). You will then see the following screen.
14-12