A SERVICE OF

logo

Time Protocols
TimeP: Viewing, Selecting, and Configuring
Use the Space bar to select the Manual mode.
i. Press [>] to move the cursor to the
Server Address field.
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Note: This step replaces any previously configured TimeP server
IP address.
iii. Press [>] to move the cursor to the
Poll Interval field, then go to step
6.
6. In the
Poll Interval field, enter the time in minutes that you want for a TimeP
Poll Interval.
Press
to return to the Actions line, then (for Save) to enter the new
time protocol configuration in both the startup-config and running-config
files.
8-16