1
1-16 Setting Up the Printer
3. Press the Reset button repeatedly until the appropriate
H
ink out light
comes on.
The following list shows the ink out lights corresponding to each numbered pattern:
• Pattern #1: black
H ink out light on
• Pattern #2: cyan
H ink out light on
• Pattern #3: magenta
H ink out light on
• Pattern #4: yellow
H ink out light on
4. Press the Eject button to enter your selection.
The printer prints seven patterns, similar to the ones below. The paper tray lights turn
on and the
P Operate
and
[ lower paper tray lights flash.
5. Determine which set of lines on the printed sheet is vertically aligned, and
select the corresponding number using the Reset and Eject buttons and the
table below.
Press the
Eject
button to move the selection to the right and press the
Reset
button to
move it to the left. Press the buttons repeatedly until the appropriate
H Ink Out
light(s)
come on or flash to select the vertically aligned pattern.
For example, to select the correct alignment pattern from the sample above, press the
Eject
or
Reset
button until the cyan and magenta ink out lights start flashing.
Ink out light indicators for vertically aligned pattern
#1 #2 #3 #4 #5 #6 #7
black on black
flashing
cyan on cyan
flashing
magenta
on
yellow
flashing
yellow on
magenta
flashing
