TM
Page 2
Reference manual Foundation Fieldbus Control module
DOC.RM.QC34.E Rev: A
October, 2006
CONTENTS
A ESSENTIAL INSTRUCTIONS 3
A1 Before you start .......................................... 3
A2 Orientation (see fig. A1) ............................. 3
A3 Applicable control modules ........................ 3
A4 Installation, operation and maintenance
reference documents ................................. 3
A5 Operating medium...................................... 3
A6 Product integrety ........................................ 3
A7 Hazardous areas........................................ 4
A8 Warning ; Moving parts .............................. 4
A9 Prevent moisture entering the actuator ...... 4
A10 Warning ; Magnetic material....................... 4
A11 Warning ; Temperature range ..................... 4
1 Module Description 5
1.1 FieldQ™ Foundation Fieldbus™ Control
Module ....................................................... 5
1.2 Foundation Fieldbus™ Communication .... 6
1.3 Device Description and Methods ............... 6
1.4 Node Address ............................................ 6
1.5 Foundation Fieldbus™ function blocks....... 6
1.6 Related Information .................................... 7
1.7 Specifications, Foundation Fieldbus™
Hardware ................................................... 7
2 Installation 8
2.1 Introduction ................................................ 8
2.2 Applicable control modules ........................ 8
2.3 Before starting............................................ 8
2.4 Pneumatic connections .............................. 8
2.5 Electric connections ................................... 9
3 Commisioning 11
3.1 Implementation of the device driver in the
host system. ............................................. 11
3.2 Intialization ............................................... 11
3.3 Function block assignments ..................... 13
3.4 Troubleshooting ........................................ 14
4 Detailed Configuration 16
4.1 Resource block ........................................ 16
4.2 Transducer block ...................................... 21
5 Operations and Maintenance 33
5.1 Fault state ................................................ 33
5.2 Restart method ........................................ 33
5.3 Restarting the module .............................. 33
