350 Machine Settings
WLAN TCP/IP Boot Method -
Select the BOOT method that best suits your needs.
IP Address -
Enter the IP address.
Subnet Mask -
Enter the Subnet mask.
Gateway -
Enter the Gateway address.
Node Name -
Enter the Node name.
(Up to 32 characters)
WINS Cong -
Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS server.
DNS Server Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS server.
APIPA -
Set the machine to automatically allocate the IP address
from the link-local address range.
IPv6 -
Turn the IPv6 protocol on or off.
WLAN
Assistant
- -
Configure your wireless network settings using the Dell
CD-ROM.
Setup
Wizard
- -
Configure your wireless network settings manually.
WPS/AOSS - -
Configure your wireless network settings using the one-
button push method.
WPS w/PIN
Code
- -
Configure your wireless network settings using WPS with
a PIN.
WLAN Status -
View the current wireless network status.
Signal -
View the current wireless network signal strength.
SSID -
View the current SSID.
Comm. Mode -
View the current Communication Mode.
MAC
Address
- -
View the MAC address of the machine.
Set to
Default
- -
Restore the wireless network setting to the factory setting.
WLAN
Enable
- -
Turn the wireless LAN on or off manually.
Wi-Fi Direct Push
Button
- -
Configure your Wi-Fi Direct™ network settings using the
one-button push method.
PIN Code - -
Configure your Wi-Fi Direct™ network settings using WPS
with a PIN code.
Manual - -
Configure your Wi-Fi Direct™ network settings manually.
Group
Owner
- -
Set your machine as the Group Owner.
Device
Info.
Device Name -
View the device name of your machine.
SSID -
View the SSID of the Group Owner.
When the machine is not connected, LCD displays Not
Connected.
IP Address -
View the current IP Address of your machine.
Status
Info.
Status -
View the current Wi-Fi Direct™ network status.
Signal -
View the current Wi-Fi Direct™ network signal strength.
When your machine acts as Group Owner, the LCD always
indicate a strong signal.
I/F
Enable
- -
Turn the Wi-Fi Direct™ connection on or off.
