229Network
Option Description
Status Displays whether the SNTP protocol is enabled or disabled.
SNTP Server Method
Select AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will
obtain the address from that server automatically.
• STATIC
Type the address you want to use.
Primary SNTP Server Address
Secondary SNTP Server Address
Type the server address (up to 64 characters).
The secondary SNTP server address is used as a backup to the primary
SNTP server address. If the primary server is unavailable, the machine
will contact the secondary SNTP server.
Primary SNTP Server Port
Secondary SNTP Server Port
Type the port number (1-65535).
The secondary SNTP server port is used as a backup to the primary
SNTP server port. If the primary port is unavailable, the machine will
contact the secondary SNTP port.
Synchronization Interval Type the number of hours between server synchronization attempts (1-
168 hours).
Synchronization Status Confirm the latest synchronization status.
8. Click Submit.
Technical Information for Advanced Users
• Additional Network Settings for Windows
®
• Available Services
When you want your computer to print to the Dell print server, you must use a resource, also known as a 'service.'
The Dell print server provides these predefined services:
• Other Ways to Configure the IP Address
• Reset the Network Settings to the Factory Settings
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
