– Remote Access Card - IP address information and RAC type and Web interface URL.
See, About Inventory Jobs.
• Storage
The host system storage provides a graphical and detailed view of the capacity and type of physical and logical
storage for storage connected to a host-based storage controller, including:
– Host system total storage, unconfigured, configured, and both global and dedicated hot spare disks capacity
– List of how many of each storage component is present in the system component data table that contains
detailed information on that component
• Firmware
Run the Firmware Update Wizard or view your firmware version. See, Firmware Updates.
• Power Monitoring
The host system power monitoring provides general power information, energy statistics, and reserve power
information, including:
– Current power budget, profile, warning and failure thresholds
– Energy consumption, system peak power, and amperage statistics
– Reserve power and peak reserve capacity
NOTE: Not all power supplies support this feature and blade enclosure power supplies are not supported.
• Warranty
Warranty retrieval provides the following information for Dell servers:
– Updated service warranty information, while only transmitting the host service tag
– Warranty information updated at scheduled intervals
– Secure transmission using a proxy server and credentials
– Information through a tested, secure connection
See, Warranty Retrieval.
Host Actions
The Host actions are commands you performed on the current host server, such as:
• Use the Blink Indicator Light to blink the LCD front indicator light. See, Setting Up Physical Server Front Indicator
Lights.
• Use the Run Firmware Update Wizard to display the Firmware Update wizard and update the host server firmware.
See, Running the Firmware Update Wizard.
• Use the iDRAC Reset to reset iDRAC without rebooting the host.
See, Resetting iDRAC.
Management Consoles
The management consoles are used to launch external system management consoles, such as:
• Click Remote Access Console to launch the Integrated Dell Remote Access Controller (iDRAC) Web user interface.
• Click OMSA Console to launch the OpenManage Server Administrator (OMSA) user interface if it has been
configured. See, Enabling The OMSA Link
• Click Blade Chassis Console to launch the Chassis Management Controller (CMC) Web user interface.
Dell Online Services
38
