Cisco Systems DOC-78-17916 Manual

A SERVICE OF

next previous

4-15

Installing Management Center for Cisco Security Agents 5.2

78-17916-01

Chapter 4 Quick Start Configuration

Configure a Rule Module

Figure 4-6 Add Rules to Module

Step 4 In the File access control rule configuration view (see Figure 4-7), enter the

following information:

• Description—Quarantined and Suspected Virus Applications, write All Files

• Enabled—(This is selected by default. Don’t change this setting for this

example.)

Step 5 Select Priority Deny from the action pulldown list.

By selecting Priority Deny here, we are stopping the quarantined applications

we’re going to specify later from performing a selected operation on the files we

will indicate. By default, when you create a deny rule, all other actions are

allowed unless specifically denied by other rules. See the User Guide for

information on allow/deny specifics.