A SERVICE OF

logo

Chapter 3 Installation
Installing the Switch on a DIN Rail
3-56
Catalyst 2955 Hardware Installation Guide
78-14944-03
Figure 3-29 Mounting the Switch on a DIN Rail in a Face-Down Position
Step 2
Rotate the switch down toward the DIN rail until the release tab on the rear panel
clicks.
Step 3 Lift lightly on the bottom of the switch to ensure that it is firmly locked in place.
After the switch is mounted on the DIN rail, power on the switch as described in
Powering On the Switch and Running POST section on page 3-13.
1 DIN rail clip 3 DIN rail clip release tab
2 DIN rail
104571
1
2
3