A SERVICE OF

logo

Chapter 3 Installation
Connecting the Switch to the Power Converter
3-38
Catalyst 2955 Hardware Installation Guide
78-14944-03
Step 3 Insert the line and neutral wire leads into the terminal block line and neutral
connections (see Figure 3-17). Make sure that you cannot see any wire lead.
Ensure that only wire with insulation extends from the connectors.
Step 4 Tighten the line and neutral terminal block screws.
Figure 3-17 Connecting AC Power to the Power Converter
Step 5
Set the input voltage selector on the power converter to 115 or 230 V, depending
on your country voltage settings or the requirements for the AC receptacle that
you are using. (See Table 3-2.)
Step 6 Connect the other end of the AC power cord to the AC outlet.
Table 3-2 lists power converter input voltages and the corresponding input voltage
selector settings.
1 To AC power source
97329
D
C ok
+
DC 24V/2.5A
AC Power Converter
PW
R-2955-AC=
AC
115/230V
50-60H
z
N L
+
2
3
0
V
1