A SERVICE OF

logo

36-36
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Chapter 36 Configuring QoS
Configuring Standard QoS
Figure 36-12 Port Trusted States within the QoS Domain
Beginning in privileged EXEC mode, follow these steps to configure the port to trust the classification
of the traffic that it receives:
201781
Trunk
Trusted interface
Traffic classification
performed here
Trusted boundary
P1P3
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface interface-id Specify the port to be trusted, and enter interface configuration
mode.
Valid interfaces include physical ports.