Index
IN-34
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
private VLANs
across multiple switches 15-4
and SDM template 15-4
and SVIs 15-5
and switch stacks 15-5
benefits of 15-1
community ports 15-2
community VLANs 15-2, 15-3
configuration guidelines 15-7, 15-8
configuration tasks 15-6
configuring 15-10
default configuration 15-6
end station access to 15-3
IP addressing 15-3
isolated port 15-2
isolated VLANs 15-2, 15-3
mapping 15-14
monitoring 15-15
ports
community 15-2
configuration guidelines 15-8
configuring host ports 15-11
configuring promiscuous ports 15-13
isolated 15-2
promiscuous 15-2
primary VLANs 15-1, 15-3
promiscuous ports 15-2
secondary VLANs 15-2
subdomains 15-1
traffic in 15-5
privileged EXEC mode 2-2
privilege levels
changing the default for lines 7-9
exiting 7-9
logging into 7-9
overview 7-2, 7-7
setting a command with 7-8
promiscuous ports
configuring 15-13
defined 15-2
protected mode
described 3-15
disabling 3-16
enabling 3-16
guidelines and restrictions 3-16
protected ports 1-9, 25-5
protocol-dependent modules, EIGRP 38-42
Protocol-Independent Multicast Protocol
See PIM
provider edge devices 38-71
provisioning new members for a switch stack 5-9
proxy ARP
configuring 38-13
definition 38-11
with IP routing disabled 38-13
pruning, VTP
disabling
in VTP domain 13-14
on a port 12-24
enabling
in VTP domain 13-14
on a port 12-23
examples 13-5
overview 13-4
pruning-eligible list
changing 12-23
for VTP pruning 13-5
VLANs 13-14
PVST+
described 17-10
IEEE 802.1Q trunking interoperability 17-11
instances supported 17-10
