Contents
xxiv
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Default System Message Logging Configuration 31-4
Disabling Message Logging 31-4
Setting the Message Display Destination Device 31-5
Synchronizing Log Messages 31-6
Enabling and Disabling Time Stamps on Log Messages 31-8
Enabling and Disabling Sequence Numbers in Log Messages 31-8
Defining the Message Severity Level 31-9
Limiting Syslog Messages Sent to the History Table and to SNMP 31-10
Enabling the Configuration-Change Logger 31-11
Configuring UNIX Syslog Servers 31-12
Logging Messages to a UNIX Syslog Daemon 31-12
Configuring the UNIX System Logging Facility 31-13
Displaying the Logging Configuration 31-14
CHAPTER
32 Configuring SNMP 32-1
Understanding SNMP 32-1
SNMP Versions 32-2
SNMP Manager Functions 32-3
SNMP Agent Functions 32-4
SNMP Community Strings 32-4
Using SNMP to Access MIB Variables 32-4
SNMP Notifications 32-5
SNMP ifIndex MIB Object Values 32-5
Configuring SNMP 32-6
Default SNMP Configuration 32-6
SNMP Configuration Guidelines 32-6
Disabling the SNMP Agent 32-7
Configuring Community Strings 32-8
Configuring SNMP Groups and Users 32-9
Configuring SNMP Notifications 32-11
Setting the Agent Contact and Location Information 32-15
Limiting TFTP Servers Used Through SNMP 32-15
SNMP Examples 32-16
Displaying SNMP Status 32-17
CHAPTER
34 Configuring Network Security with ACLs 34-1
Understanding ACLs 34-1
Supported ACLs 34-2
Port ACLs 34-3
