Contents
xxv
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Router ACLs 34-4
VLAN Maps 34-5
Handling Fragmented and Unfragmented Traffic 34-5
ACLs and Switch Stacks 34-6
Configuring IPv4 ACLs 34-7
Creating Standard and Extended IPv4 ACLs 34-7
Access List Numbers 34-8
ACL Logging 34-9
Creating a Numbered Standard ACL 34-10
Creating a Numbered Extended ACL 34-11
Resequencing ACEs in an ACL 34-15
Creating Named Standard and Extended ACLs 34-15
Using Time Ranges with ACLs 34-17
Including Comments in ACLs 34-19
Applying an IPv4 ACL to a Terminal Line 34-19
Applying an IPv4 ACL to an Interface 34-20
Hardware and Software Treatment of IP ACLs 34-22
IPv4 ACL Configuration Examples 34-22
Numbered ACLs 34-24
Extended ACLs 34-24
Named ACLs 34-25
Time Range Applied to an IP ACL 34-25
Commented IP ACL Entries 34-25
ACL Logging 34-26
Creating Named MAC Extended ACLs 34-27
Applying a MAC ACL to a Layer 2 Interface 34-28
Configuring VLAN Maps 34-29
VLAN Map Configuration Guidelines 34-30
Creating a VLAN Map 34-31
Examples of ACLs and VLAN Maps 34-32
Applying a VLAN Map to a VLAN 34-34
Using VLAN Maps in Your Network 34-34
Denying Access to a Server on Another VLAN 34-34
Using VLAN Maps with Router ACLs 34-35
VLAN Maps and Router ACL Configuration Guidelines 34-35
Examples of Router ACLs and VLAN Maps Applied to VLANs 34-36
ACLs and Switched Packets 34-36
ACLs and Bridged Packets 34-37
ACLs and Routed Packets 34-38
