Filter
Top Products
10 Chapter 2
Figure 2 Service Location (SRV)
3. Select the Service Location (SRV) resource record type and then click Create Record
to open the New Resource Record dialog box.
Figure 3 New Resource Record
4. Use the following guidelines (Domain is automatically shown):
• Enter _Pcoip-tool in the Service box.
• Enter _tcp in the Protocol box.
• (Optional) Enter the value you want for this WDM server in the Priority box (the
lower the priority value the higher the priority).
• (Optional) Enter the value you want for this WDM server in the Weight box (within
the same priority class the higher the weight value the higher the priority).
• Enter 50000 in the Port number box.
• Enter the <FQDN of the WDM server> (for example, p20.rap45.com) in the Host
offering this service box.
5. Click OK.