Filter
Top Products
English 5
Operation of the unit may be hazardous if
maintenance is neglected or repairs, re-
builds, or adjustments are not performed in
accordance with the manufacturer’s design
criteria. Therefore, maintenance facilities
(on or off premises), trained personnel, and
detailed procedures shall be provided.
Maintenance and inspection of the unit shall
be performed in conformance with the follo-
wing practices:
A a schedules planned maintenance, lubri-
cation, and inspection system shall be
followed; consult the manufacturer’s re-
commendations.
B
only trained and authorized personnel shall
be permitted to maintain, repair, adjust,
and inspect the unit, and in accordance
with manufacturer’s specifications.
Avoid fire hazards and have fire protection
equipment present in the work area. Do not
use open pans of fuel or flammable cleaning
fluids for cleaning parts.
Any unit not in safe operating condition shall
be removed from service.
Repairs shall not be made in Class I, Class
II, and Class III locations.
Fire Prevention: The unit shall be kept in a
clean condition and reasonably free of lint,
excess oil, and grease. Noncombustible
agents are preferred for cleaning the unit.
Flammable liquids [those having flash points
at or above 100°F (37,8°C)] are not allowed.
Precautions regarding toxicity, ventilation,
and fire hazard shall be appropriate for the
agent or solvent used.
Nameplate Visibility: The unit type designa-
tions as shown on the nameplate and the
type markers shall not be covered over with
paint so that their identification information is
obscured.
The unit shall not be used in classified are-
as.
Please read and comply with
these instructions prior to the
initial operation of your machine. Retain the-
se operating instructions for future reference
or for subsequent possessors.
Before using the machine for the first time,
read and observe these operating instruc-
tions and the accompanying brochure: Safe-
ty information for brush cleaning units and
spray-extraction units, 5.956-251.
Safety devices protect the user. These must
not be disabled and the function they per-
form should not be bypassed.
To deactivate the brush drive operation im-
mediately, release the control handle.
The following symbols are used in this ope-
rating manual:
ƽ Danger
Indicates an immediate threat of danger.
Failure to observe the instruction may result
in death or serious injuries.
ṇ Warning
Indicates a possibly dangerous situation.
Failure to observe the instruction may result
in light injuries or damage to property.
Note
Indicates useful tips and important informati-
on about the product.
The machine is used for the wet cleaning or
polishing of level floors. It can be easily ad-
apted to each cleaning task by setting a cle-
aning program and the water quantity.
A working width of 400 mm / 15.7 in and a
capacity of 25 litres / 6.6 gal in both fresh
and dirty water tanks facilitate an effective
cleaning performance.
MAINTENANCE AND RE-
BUILD PRACTICES
FIRE SAFETY STANDARD
Safety instructions
Safety devices
Control handle
Symbols
Function