Filter
Top Products
English 11
ṇ
Warning
Risk of damage. Do not hose down the ma-
chine with water and do not use aggressive
detergents.
Î Drain dirty water.
Î Check the lint filter, clean if required.
Î Clean the outside of the machine with a
damp cloth soaked in mild detergent.
Î Clean the squeegee blades and the
splash guard, check for wear and repla-
ce if required.
Î Check the brushes for wear, replace if
required.
Î Check the condition of the seals between
dirty water tank and cover, replace if re-
quired.
Î Have the prescribed inspection carried
out by the customer service.
Î Remove the squeegee tool.
Î Unscrew the star grips.
Î Remove the plastic parts.
Î Remove the squeegee blades.
Î Insert new squeegee blades.
Î Insert the plastic parts.
Î Screw in and tighten the star grips.
Î Empty the dirty water reservoir.
Î Press the machine down using the push
handle.
Î Turn the running gear to the front with
your foot.
Î Turn the button for setting the advance
speed in – direction.
Î Raise the disk brushes.
Î Turn the disk brushes through approxi-
mately 45°.
Î Remove the disk brushes downwards.
Î Insert the new disk brushes in reverse
sequence.
Î Set the advance speed.
Î Turn the running gear to the rear with
your foot.
To ensure a reliable operation of the machi-
ne maintenance contracts can be concluded
with the competent Windsor sales office.
In case of danger of frost:
Î Empty the fresh and dirty water reser-
voirs.
Î Store the machine in a frost-protected
room.
ƽ Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the
machine.
Î Drain and dispose of dirty water and ex-
cess fresh water.
If a error cannot be rectified using the table
below, please contact Customer Service.
Maintenance schedule
After working with the machine
Monthly
Yearly
Maintenance
Replacing the squeegee blades
Replacing the disk brushes
Maintenance contract
Frost protection
Errors