Filter
Top Products
31
1. How can I permanently change a part of
my program?
Press
VIEW
PRGM
and
ADV
DAY
until you reach the
time/temperature schedule you want. Then
press
TIME
FWD
or
TIME
BACK
and or to
change the program. See PROGRAMMING
YOUR THERMOSTAT.
2. How can I have no change in tempera-
ture from one time period to another?
Simply select the same temperature for
each consecutive time period. For example,
you may select the same COOL A tempera-
ture for period 2 as you did for period 1,
which means the temperature will not change
from COOL A when period 2 begins. See
PROGRAMMING YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
to the time/temperature mode. To resume
programming, press
VIEW
PRGM
and
ADV
DAY
until
you return to the point where you stopped
programming. Then you may continue to
program the thermostat normally. If you
want to stop programming at this point,
QUESTIONS AND ANSWERS