Filter
Top Products
27
Program Cooling Temperatures
If outside temperature is below 50°F, we
recommend that you remove the ther-
mostat from the wall before proceeding
with the following steps to program cool-
ing temperatures. Personal injury and/or
property damage could result from air
conditioner compressor slugging. Fresh
“AA” alkaline batteries (such as Ener-
gizer
®
brand) must be installed to per-
form off-wall programming. Program-
ming away from the wall should prevent
accidental compressor operation. BE
SURE TO PRESS
SYSTEM
HEAT - OFF - COOL
UNTIL OFF IS
DISPLAYED BEFORE REATTACHING
THE THERMOSTAT TO THE SUBBASE!
1. To program cooling temperatures for the
heating/cooling periods you have already
set, press
SYSTEM
HEAT - OFF - COOL
until COOL is displayed.
2. Press
VIEW
PRGM
once. The Monday heating/
cooling period 1 start time you programmed
earlier will be displayed, along with the
currently programmed COOL A, B, C, or D
temperature.
3. Press or to display the COOL A,
B, C, or D temperature you want for Monday’s
heating/cooling period 1. If you want the fan
to run continuously during this period, press
FAN
ON - AUTO
until PRG FAN is displayed.
4. Press
VIEW
PRGM
, then press or to
select Monday’s COOL A, B, C, or D tem-
perature for period 2. If you want the fan to
CAUTION
!