Filter
Top Products
22
ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for
entering cooling programming). Fresh “AA” Ener-
gizer
®
alkaline batteries must be installed to per-
form off-wall programming. BE SURE SYSTEM
SWITCH IS SET TO OFF POSITION BEFORE
REATTACHING THERMOSTAT TO SUBBASE!
Set Current Time and Day
1. Press
SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct minutes.
3. Press
SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct hour and AM/PM designa-
tion (AM begins at midnight; PM begins at
noon).
5. Press
SET
CLOCK
once. The display will show the
day of the week as an abbreviation (MON
for Monday, TUE for Tuesday, etc.).
6. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the current day of the week.