Filter
Top Products
5
Before you begin programming your thermo-
stat, you should be familiar with its features and
with the display and the location and operation
of the thermostat buttons. The information in
this section will help you become familiar with
your new thermostat so that you can easily
program it.
Your thermostat consists of two parts: the ther-
mostat body and the subbase.
Use
SYSTEM
HEAT - OFF - COOL - AUTO
to turn thermostat OFF be-
fore removing or attaching the thermo-
stat body. Failure to do so may result in
equipment damage and/or personal in-
jury.
OPERATING YOUR THERMOSTAT
The subbase is attached to the wall, but you can
remove the thermostat body for easy program-
ming. To remove the thermostat body from the
subbase, grasp the thermostat body and gently
pull it straight out from the subbase. To attach
the thermostat body, line up the four terminal
pins on the upper section of the thermostat back
with the matching connector on the subbase.
Insert these, then gently pivot the thermostat
body down to connect the eight pin connectors
on the lower portion of the thermostat back.
Gently push until the snap connectors engage.
DO NOT FORCE OR PRY THE THERMOSTAT
as this may damage the unit.
CAUTION
!