Filter
Top Products
14
If the thermostat is configured for automatic
changeover, the thermostat will not allow the
temperature separation between the highest
heat setting and the lowest cool setting to be
less that 1°F. For example, if the highest heat
setting is 76°F, the lowest cool setting cannot be
below 77°F (see diagram below).
• TWO HOUR TEMPERATURE OVER-
RIDE — Press or until the dis-
play shows the temperature you want. The
thermostat will override current program-
ming and keep the room temperature at the
selected temperature for two hours. After
two hours, the thermostat will automatically
revert to the program.
This feature will not work in the AUTO mode.
Therefore, we do not recommend using the
temperature override feature when the thermo-
stat is in the AUTO mode. Pressing or
in the AUTO mode will cause the thermo-
stat to revert to the mode (heat or cool) in which
it was last cycled before switching to the AUTO
mode and will prevent automatic switching for
two hours. If you do press or in the
AUTO mode, you may press
RUN
PRGM
to return to
programmed operation in the AUTO mode.
NOTE
79
78
77
76
75
74
73
COOLING TEMPERATURES
HEATING TEMPERATURES
DEAD BAND 1°F
NOTE