Filter
Top Products
31
Press
SYSTEM
HEAT - OFF - COOL - AUTO
until OFF is displayed. Reattach
thermostat to subbase. Then press
SYSTEM
HEAT - OFF - COOL - AUTO
to
select the operation mode you want (HEAT,
COOL, AUTO).
When you have completed programming and
selected the desired operating mode, you may
set option switch #4 for total keypad lockout.
programming instructions to correct the er-
ror (you can change any part of your pro-
gram while you are reviewing it).
6. Press
RUN
PRGM
.
7. Press
SYSTEM
HEAT - OFF - COOL - AUTO
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
times and temperatures.
9. Press
RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
NOTE